Battery Calculatorby Voltage Drop Calculator

Battery calculators / Runtime & backup

Understand your battery. Plan your power.

Power Bank Usable Capacity Calculator

Translate cell-level power-bank capacity into usable output energy and equivalent full device charges.

Your inputs

mAh
V
V
%
Wh

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Delivered Wh = cell mAh × cell V ÷ 1,000 × efficiency; output mAh = delivered Wh × 1,000 ÷ output V

Energy is conserved across the voltage conversion after losses. Changing output voltage changes the equivalent mAh without creating extra watt-hours.

Device charge count assumes the device input energy per full charge includes its own charging losses. Power-bank electronics, cable loss and device use while charging affect results.

Power bank rated capacity, output mAh and device charges

A power bank capacity calculator separates the internal-cell rating from delivered output. Convert rated cell mAh to Wh using nominal cell voltage, apply conversion efficiency, and convert delivered Wh back to equivalent mAh at the output voltage. The two mAh figures refer to different voltages.

To calculate how many phone charges a power bank provides, divide usable output energy by device input energy per full charge. If the device energy value is only its battery nameplate Wh, additional device charging losses can reduce actual charge count. Running the phone while charging also consumes energy.

Worked example

A transparent starting point

10,000 mAh at 3.7 V and 90% efficiency gives 33.3 Wh, equivalent to 6,660 mAh at 5 V.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Rated cell-level capacity (mAh)Usable output energy
5,000 mAh16.65 Wh
10,000 mAh33.3 Wh
15,000 mAh49.95 Wh

All other inputs use the illustrative defaults in the form.

Power bank rated capacity, output mAh and device charges — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
5000mAh cell rating, 5V outputRated cell-level capacity: 5,000 mAh; Output voltage: 5 V16.65 Wh
5000mAh cell rating, 9V outputRated cell-level capacity: 5,000 mAh; Output voltage: 9 V16.65 Wh
10000mAh cell rating, 5V outputRated cell-level capacity: 10,000 mAh; Output voltage: 5 V33.3 Wh
10000mAh cell rating, 9V outputRated cell-level capacity: 10,000 mAh; Output voltage: 9 V33.3 Wh
20000mAh cell rating, 5V outputRated cell-level capacity: 20,000 mAh; Output voltage: 5 V66.6 Wh
20000mAh cell rating, 9V outputRated cell-level capacity: 20,000 mAh; Output voltage: 9 V66.6 Wh
50000mAh cell rating, 5V outputRated cell-level capacity: 50,000 mAh; Output voltage: 5 V166.5 Wh
50000mAh cell rating, 9V outputRated cell-level capacity: 50,000 mAh; Output voltage: 9 V166.5 Wh

Unchanged inputs: Rated cell-level capacity = 10,000 mAh; Rated cell nominal voltage = 3.7 V; Output voltage = 5 V; Conversion efficiency = 90 %; Device energy per full charge = 15 Wh. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Can this determine airline permission?

No. Use the labeled nominal Wh and consult current FAA and airline requirements; delivered output energy is not the travel rating.

How should I use the result?

Device charge count assumes the device input energy per full charge includes its own charging losses. Power-bank electronics, cable loss and device use while charging affect results.

Why is a 10000mAh power bank not 10000mAh at 5V?

The nameplate may be referenced to internal cells at about 3.7 V. After converting voltage and allowing for loss, equivalent 5 V output charge is lower.

How many phone charges does a 10000mAh power bank provide?

At 3.7 V and 90% output efficiency it supplies 33.3 Wh. For a device requiring 15 Wh input per full charge, that is 2.22 equivalent charges under those assumptions.

Can I use this as a TSA power bank calculator?

Use the nominal cell Wh for energy labeling and current official aviation and carrier rules for travel. This page does not decide permission, and usable output Wh is not a substitute for the labeled rating.

Can I convert mAh directly to hours?

Only with a known average current or with voltage, losses and load power. Capacity alone does not establish operating duration.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
  2. Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.