Battery calculators / Packs & electrical
Understand your battery. Plan your power.
Battery Series and Parallel Pack Calculator
Calculate an equal-cell battery pack, including 18650, 21700 and LiFePO4 series-parallel arrangements.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
The method
Formula and calculation steps
Pack V = cell V × S; pack Ah = cell Ah × P; Wh = pack V × pack Ah
Series adds voltage and parallel adds amp-hour capacity. Ideal continuous current is the single-cell rating times parallel count, before interconnect, BMS and thermal limits.
Cell format does not define capacity or current. Enter the exact cell datasheet ratings. This arithmetic does not approve a pack design or calculate fault protection.
18650 and 21700 battery pack capacity and configuration
An 18650 battery pack calculator and a 21700 battery pack calculator use the same series-parallel arithmetic. The cell format describes dimensions, not one capacity. Read cell nominal voltage, rated Ah and current limits from the exact product data before entering a configuration.
A battery pack design calculation should track nominal voltage, usable energy, maximum current and mechanical protection separately. Series cells add voltage; parallel strings add Ah and ideally share current. Wiring, fuses, BMS, thermal conditions and cell matching can lower the usable current below the simple cell-rating sum.
Continue with: Battery Watt Hour Calculator · Battery C Rate Calculator · Battery Cable Voltage Drop Calculator
Worked example
A transparent starting point
4S2P using 3.6 V, 3 Ah cells gives 14.4 V, 6 Ah, 86.4 Wh and 8 cells.
The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.
How one input changes the answer
| Parallel strings (P) | Nominal pack voltage |
|---|---|
| 1 P | 14.4 V |
| 2 P | 14.4 V |
| 3 P | 14.4 V |
All other inputs use the illustrative defaults in the form.
18650 and 21700 battery pack capacity and configuration — calculated examples
Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.
| Case | Changed inputs | Result |
|---|---|---|
| 1S1P identical 3Ah cells | Cells in series: 1 S; Parallel strings: 1 P | 3.6 V |
| 1S2P identical 3Ah cells | Cells in series: 1 S; Parallel strings: 2 P | 3.6 V |
| 2S1P identical 3Ah cells | Cells in series: 2 S; Parallel strings: 1 P | 7.2 V |
| 4S2P identical 3Ah cells | Cells in series: 4 S; Parallel strings: 2 P | 14.4 V |
| 7S3P identical 3Ah cells | Cells in series: 7 S; Parallel strings: 3 P | 25.2 V |
| 10S4P identical 3Ah cells | Cells in series: 10 S; Parallel strings: 4 P | 36 V |
| 13S4P identical 3Ah cells | Cells in series: 13 S; Parallel strings: 4 P | 46.8 V |
| 14S5P identical 3Ah cells | Cells in series: 14 S; Parallel strings: 5 P | 50.4 V |
Unchanged inputs: Nominal cell voltage = 3.6 V; Single-cell capacity = 3 Ah; Cells in series = 4 S; Parallel strings = 2 P; Cell continuous-current rating = 10 A. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.
Common questions
Can I mix different batteries in parallel?
Use matched cells and follow the manufacturer requirements. This calculator assumes identical cells and equal current sharing.
How should I use the result?
Cell format does not define capacity or current. Enter the exact cell datasheet ratings. This arithmetic does not approve a pack design or calculate fault protection.
What is the formula for batteries in series and parallel?
For identical cells, pack voltage is cell voltage times series count and pack Ah is cell Ah times parallel count. Total cells equals series count times parallel count.
How do I calculate Ah of batteries in series?
Series connection leaves Ah unchanged for identical batteries. Two 12 V 100 Ah units in series are 24 V 100 Ah; two in parallel are 12 V 200 Ah.
What does a 4S2P battery pack mean?
It has four cell groups in series and two cells in parallel per group, for eight cells. At 3.6 V and 3 Ah per cell, nominal pack ratings are 14.4 V, 6 Ah and 86.4 Wh.
Can I design an EV, RC car or drone pack from these results?
The arithmetic checks configuration only. Required current, approved cell choice, balancing, insulation, enclosure and protection need separate design work. An energy match alone is not a validated pack.
Can I calculate a LiFePO4 or lithium-ion battery pack?
Yes, using the correct nominal voltage and capacity for that cell type. Do not apply a 3.6 V cell assumption to every chemistry.
Is a lithium-ion battery formula a chemical formula or a pack calculation?
A chemical-equation question is different from series/parallel electrical arithmetic. This page computes pack ratings; it does not provide a universal lithium-ion reaction equation, electrode design or an EV battery mechanical design.
Related calculators
Sources and formula basis
Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.
- Cadex Battery University BU-302 — series and parallel configurationshttps://www.batteryuniversity.com/article/bu-302-series-and-parallel-battery-configurations
- FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.