Battery Calculatorby Voltage Drop Calculator

Battery calculators / Charging

Understand your battery. Plan your power.

Battery Charge Time Calculator

Estimate charge time from the capacity to replenish and average charging current.

Your inputs

Ah
%
%
A
%

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Hours = Ah × (target SoC − start SoC) ÷ (average charging A × coulombic efficiency)

Only the selected change in state of charge is replenished. Coulombic efficiency represents stored charge divided by charge passed into the battery; it differs from an AC energy efficiency.

Use average current over the entire charging session. Entering a charger peak rating usually underestimates time because absorption and constant-voltage taper reduce current. This does not select a charge voltage.

Battery charging time for car, lithium and lead-acid batteries

A battery charging time calculator estimates the missing charge between a starting and target SoC. Car battery charge time, lithium-ion battery charge time and LiFePO4 charge time all require an appropriate average current. The charger nameplate maximum is not automatically the session average.

Use actual full-charge capacity when a battery has aged. The efficiency field here represents charge stored divided by charge passed into the battery, not grid-energy efficiency. Absorption, balancing and constant-voltage taper can extend the session beyond a calculation based only on peak current.

Worked example

A transparent starting point

100 Ah from 20% to 100%, 10 A average and 95% coulombic efficiency takes 8.42 hours.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Average charging current (A)Estimated charging time
5 A16.84211 hours
10 A8.421053 hours
15 A5.614035 hours

All other inputs use the illustrative defaults in the form.

Battery charging time for car, lithium and lead-acid batteries — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
50Ah at 5A averageRated battery capacity: 50 Ah; Average charging current: 5 A8.42105 hours
50Ah at 10A averageRated battery capacity: 50 Ah; Average charging current: 10 A4.21053 hours
100Ah at 5A averageRated battery capacity: 100 Ah; Average charging current: 5 A16.84211 hours
100Ah at 10A averageRated battery capacity: 100 Ah; Average charging current: 10 A8.42105 hours
150Ah at 5A averageRated battery capacity: 150 Ah; Average charging current: 5 A25.26316 hours
150Ah at 10A averageRated battery capacity: 150 Ah; Average charging current: 10 A12.63158 hours
200Ah at 5A averageRated battery capacity: 200 Ah; Average charging current: 5 A33.68421 hours
200Ah at 10A averageRated battery capacity: 200 Ah; Average charging current: 10 A16.84211 hours

Unchanged inputs: Rated battery capacity = 100 Ah; Starting state of charge = 20 %; Target state of charge = 100 %; Average charging current = 10 A; Coulombic charge efficiency = 95 %. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Is the result the full charging schedule?

No. The estimate depends on average current; consult the charger profile and battery manual for absorption, balancing and termination.

How should I use the result?

Use average current over the entire charging session. Entering a charger peak rating usually underestimates time because absorption and constant-voltage taper reduce current. This does not select a charge voltage.

How long does it take to charge a 100Ah battery?

Adding 80 Ah from 20% to 100% at 10 A average and 95% coulombic efficiency takes about 8.42 hours. A different starting charge or taper profile changes the result.

Can I calculate car battery charge time with a 5A charger?

Use the actual battery capacity and missing charge, then a realistic average current no greater than the charger and battery permit. A low current or charge taper increases elapsed time.

Does this calculate AGM battery charging voltage?

No. AGM, flooded, LiFePO4 and lithium-ion batteries have manufacturer-specific charge profiles and temperature constraints. Time arithmetic does not select an approved charging voltage.

Can I calculate phone or laptop battery charge time?

The charge balance can provide an estimate if average battery-side current and actual capacity are known. USB adapter wattage alone does not establish the battery current or complete charge curve.

Is the charging equation a chemical reaction equation?

No. It is a charge-accounting model. It does not model the chemical reactions in a secondary battery or solve a Nernst equation.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. Maccor — C-rate in battery testinghttps://www.maccor.com/battery-testing-knowledge-center/fundamentals/understanding-c-rate-in-battery-testing.html
  2. Cadex Battery University BU-903 — state-of-charge measurement methodshttps://www.batteryuniversity.com/article/bu-903-how-to-measure-state-of-charge

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.