Battery Calculatorby Voltage Drop Calculator

Battery calculators / Charging

Understand your battery. Plan your power.

Battery Charging Cost Calculator

Estimate electricity consumed and the cost of charging a battery.

Your inputs

kWh
%
currency/kWh

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Grid kWh = stored kWh ÷ efficiency; cost = grid kWh × tariff

The energy input is the energy actually added, not necessarily the full battery nameplate. Conversion loss increases energy bought from the grid.

Use a tariff that applies during charging. Fixed fees, demand charges, export opportunity cost and time-of-use scheduling are not included.

Charging electricity cost and monthly battery use

Battery charging cost is based on input energy, not just stored energy. If 10 kWh is added to the battery at 90% energy efficiency, the supply provides about 11.11 kWh. Multiply by the tariff that applies during charging.

A solar battery may have no direct charging purchase, but charging can still forgo an export payment. That opportunity cost belongs in a battery savings calculation. This page estimates charging consumption; the payback calculator additionally compares avoided imports with charging cost and installed cost.

Worked example

A transparent starting point

Adding 10 kWh at 90% efficiency uses 11.11 kWh; at 0.20 per kWh the session costs 2.22.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Energy stored per session (kWh)Cost per charging session
5 kWh1.111111 currency
10 kWh2.222222 currency
15 kWh3.333333 currency

All other inputs use the illustrative defaults in the form.

Charging electricity cost and monthly battery use — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
1kWh stored, tariff 0.15Energy stored per session: 1 kWh; Electricity price: 0.15 currency/kWh0.16667 currency
1kWh stored, tariff 0.3Energy stored per session: 1 kWh; Electricity price: 0.3 currency/kWh0.33333 currency
5kWh stored, tariff 0.15Energy stored per session: 5 kWh; Electricity price: 0.15 currency/kWh0.83333 currency
5kWh stored, tariff 0.3Energy stored per session: 5 kWh; Electricity price: 0.3 currency/kWh1.66667 currency
10kWh stored, tariff 0.15Energy stored per session: 10 kWh; Electricity price: 0.15 currency/kWh1.66667 currency
10kWh stored, tariff 0.3Energy stored per session: 10 kWh; Electricity price: 0.3 currency/kWh3.33333 currency
40kWh stored, tariff 0.15Energy stored per session: 40 kWh; Electricity price: 0.15 currency/kWh6.66667 currency
40kWh stored, tariff 0.3Energy stored per session: 40 kWh; Electricity price: 0.3 currency/kWh13.33333 currency

Unchanged inputs: Energy stored per session = 10 kWh; Conversion efficiency = 90 %; Electricity price = 0.2 currency/kWh; Sessions per month = 30 . Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Which currency does the calculator use?

Use one currency consistently. Results are in the same currency as the entered electricity price.

How should I use the result?

Use a tariff that applies during charging. Fixed fees, demand charges, export opportunity cost and time-of-use scheduling are not included.

How do I calculate battery charging cost per month?

Calculate input kWh per session times the electricity price, then multiply by sessions per month. Use a representative tariff and number of sessions.

Does charger efficiency mean battery round-trip efficiency?

Not necessarily. For one charging session use input-to-stored energy efficiency. Round-trip efficiency includes the subsequent discharge path and is used in the savings tool.

Can I use pounds, dollars or rupees?

Yes. All price and cost results use the currency you enter consistently. There is no currency conversion or built-in local tariff.

Does the estimate include demand charges or public charging fees?

No. Per-minute pricing, connection fees, taxes and demand charges must be added according to the actual tariff.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
  2. US EIA — storage round-trip efficiencyhttps://www.eia.gov/todayinEnergy/detail.php?id=46756

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.