Battery calculators / Health & measurement
Understand your battery. Plan your power.
Battery Energy Density Calculator
Compare mass-based and volume-based battery energy density.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
The method
Formula and calculation steps
Specific energy = Wh ÷ kg; volumetric energy density = Wh ÷ L
Specific energy describes watt-hours per kilogram; volumetric energy density describes watt-hours per liter. Use the complete pack mass and enclosure volume for pack-level comparisons.
Cell-level and pack-level values are not interchangeable. This does not predict power density, operating range or durability.
Battery energy density versus specific capacity
Battery energy density can mean energy per volume in Wh/L, while specific energy means Wh/kg. Compare like-for-like boundaries: a complete battery pack includes enclosure, interconnects and protection, whereas a bare cell rating does not.
Specific capacity in Ah/kg is a different measurement from Wh/kg. If charge capacity and nominal voltage are known, estimate energy first, then divide by mass. Power density in W/kg additionally requires power capability and cannot be inferred from energy density alone.
Continue with: Battery Watt Hour Calculator · Battery Runtime Calculator
Worked example
A transparent starting point
100 Wh in 0.5 kg and 0.4 L gives 200 Wh/kg and 250 Wh/L.
The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.
How one input changes the answer
| Rated energy (Wh) | Specific energy |
|---|---|
| 50 Wh | 100 Wh/kg |
| 100 Wh | 200 Wh/kg |
| 150 Wh | 300 Wh/kg |
All other inputs use the illustrative defaults in the form.
Battery energy density versus specific capacity — calculated examples
Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.
| Case | Changed inputs | Result |
|---|---|---|
| 50Wh, 0.5kg | Rated energy: 50 Wh; Battery mass: 0.5 kg | 100 Wh/kg |
| 50Wh, 1kg | Rated energy: 50 Wh; Battery mass: 1 kg | 50 Wh/kg |
| 100Wh, 0.5kg | Rated energy: 100 Wh; Battery mass: 0.5 kg | 200 Wh/kg |
| 100Wh, 1kg | Rated energy: 100 Wh; Battery mass: 1 kg | 100 Wh/kg |
| 200Wh, 0.5kg | Rated energy: 200 Wh; Battery mass: 0.5 kg | 400 Wh/kg |
| 200Wh, 1kg | Rated energy: 200 Wh; Battery mass: 1 kg | 200 Wh/kg |
| 500Wh, 0.5kg | Rated energy: 500 Wh; Battery mass: 0.5 kg | 1,000 Wh/kg |
| 500Wh, 1kg | Rated energy: 500 Wh; Battery mass: 1 kg | 500 Wh/kg |
Unchanged inputs: Rated energy = 100 Wh; Battery mass = 0.5 kg; Battery volume = 0.4 L. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.
Common questions
Is Wh/kg a power rating?
No. Energy per mass differs from power per mass, which is expressed in W/kg.
How should I use the result?
Cell-level and pack-level values are not interchangeable. This does not predict power density, operating range or durability.
What is the energy density formula for a battery?
Volumetric energy density is rated Wh divided by volume in liters. Specific energy is rated Wh divided by mass in kilograms.
How do I calculate battery volume in liters?
For a rectangular envelope, volume in cubic centimeters divided by 1,000 gives liters. Use the intended cell or pack boundary consistently.
Can I compare an EV pack with a single 18650 cell?
Only with a clear boundary distinction. Pack hardware reduces energy per total pack mass or volume relative to cells alone.
Does greater Wh/kg guarantee longer life?
No. Energy density does not establish cycle life, safety, usable power or temperature performance.
Related calculators
Sources and formula basis
Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.
- NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
- Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot
Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.