Battery Calculatorby Voltage Drop Calculator

Battery calculators / Energy & conversions

Understand your battery. Plan your power.

Watts to Watt Hours Calculator

Calculate watts to watt hours with all required electrical inputs.

Your inputs

W
h

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Wh = W × hours

Use real watts rather than VA; integrate a varying load or enter its average wattage.

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

Watt to watt hour conversion and appliance energy use

Watt-hours are calculated by multiplying average real power by hours. A 60 W device operating for five hours consumes 300 Wh. To calculate a daily battery load, add the energy of each appliance rather than adding watts when their operating times differ.

For converting amps to watt hours, first calculate DC watts as volts times amps, then multiply by hours. The formula is Wh = V × A × h for constant values. For AC equipment, use real measured watts or account for power factor rather than treating VA as W.

Worked example

A transparent starting point

100 W for 8 hours = 800 Wh.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Continuous load (W)Energy consumed
50 W400 Wh
100 W800 Wh
150 W1,200 Wh

All other inputs use the illustrative defaults in the form.

Watt to watt hour conversion and appliance energy use — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
60W for 5hContinuous load: 60 W; Operating duration: 5 h300 Wh
60W for 8hContinuous load: 60 W; Operating duration: 8 h480 Wh
100W for 5hContinuous load: 100 W; Operating duration: 5 h500 Wh
100W for 8hContinuous load: 100 W; Operating duration: 8 h800 Wh
300W for 5hContinuous load: 300 W; Operating duration: 5 h1,500 Wh
300W for 8hContinuous load: 300 W; Operating duration: 8 h2,400 Wh
1000W for 5hContinuous load: 1,000 W; Operating duration: 5 h5,000 Wh
1000W for 8hContinuous load: 1,000 W; Operating duration: 8 h8,000 Wh

Unchanged inputs: Continuous load = 100 W; Operating duration = 8 h. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Why do I need the extra input?

Use real watts rather than VA; integrate a varying load or enter its average wattage.

How should I use the result?

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

How are watt hours calculated from volts and amps?

For a steady DC load, multiply voltage, current and hours. A 12 V load drawing 2 A for 3 hours uses 72 Wh.

How do I convert watts to kWh?

Multiply watts by hours, then divide by 1,000. A 100 W device for eight hours uses 0.8 kWh.

Does a 100W device always consume 2.4kWh per day?

Only if it averages 100 W for all 24 hours. Thermostats, sleep modes and duty cycling change the daily average.

Can I calculate a battery charger power consumption?

Use measured charger input watts times operating time. Battery energy stored is lower when charging losses are included; use the charging-cost tool for a stored-energy-to-input-energy estimate.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
  2. NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
  3. Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.