Battery calculators / Energy & conversions
Understand your battery. Plan your power.
Watts to Amp Hours Calculator
Calculate watts to amp hours with all required electrical inputs.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
The method
Formula and calculation steps
Ah = W × hours ÷ (V × efficiency)
This computes consumed Ah. Divide by an additional usable fraction to size a larger battery.
This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.
Watts to amp hours for 12V battery loads
A watts to amp hours calculator needs operating time, nominal voltage and a conversion efficiency when watts are measured after a converter. First compute load energy as watts times hours, then divide by efficiency and voltage to get battery charge consumed.
For calculating amp hours needed, distinguish discharged charge from installed capacity. The form returns consumed Ah. A battery reserved to 80% usable capacity must be larger than that charge requirement: divide consumed Ah by 0.8. The battery-backup-size calculator includes this extra step and a separate margin.
Continue with: Battery Watt Hour Calculator · Battery Runtime Calculator
Worked example
A transparent starting point
100 W for 8 hours at 12 V and 90% efficiency requires 74.07 Ah discharged.
The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.
How one input changes the answer
| Continuous load (W) | Charge consumed from battery |
|---|---|
| 50 W | 37.03704 Ah |
| 100 W | 74.07407 Ah |
| 150 W | 111.1111 Ah |
All other inputs use the illustrative defaults in the form.
Watts to amp hours for 12V battery loads — calculated examples
Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.
| Case | Changed inputs | Result |
|---|---|---|
| 100W for 1h | Continuous load: 100 W; Operating duration: 1 h | 9.25926 Ah |
| 100W for 8h | Continuous load: 100 W; Operating duration: 8 h | 74.07407 Ah |
| 300W for 1h | Continuous load: 300 W; Operating duration: 1 h | 27.77778 Ah |
| 300W for 8h | Continuous load: 300 W; Operating duration: 8 h | 222.22222 Ah |
| 500W for 1h | Continuous load: 500 W; Operating duration: 1 h | 46.2963 Ah |
| 500W for 8h | Continuous load: 500 W; Operating duration: 8 h | 370.37037 Ah |
Unchanged inputs: Continuous load = 100 W; Operating duration = 8 h; Nominal battery voltage = 12 V; Conversion efficiency = 90 %. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.
Common questions
Why do I need the extra input?
This computes consumed Ah. Divide by an additional usable fraction to size a larger battery.
How should I use the result?
This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.
How do I convert 300 watts to amp hours?
Specify voltage and duration. At 12 V over one hour and 100% efficiency, 300 W requires 25 Ah. At 90% efficiency it requires about 27.78 Ah.
How many amp hours are needed for 100 watts for 8 hours?
At 12 V and 90% efficiency, 100 × 8 / (12 × 0.9) is about 74.07 Ah discharged. Reserving capacity increases the required nameplate Ah.
Can I use this for an RV battery electrical load?
Yes, for one average load or a known combined load over a stated time. For different operating durations, sum each load energy in the home battery load planner first.
What if the load is already measured in DC battery amps?
Use amps times hours directly. Do not apply a second conversion efficiency factor to a battery-side current measurement.
Related calculators
Sources and formula basis
Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.
- FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
- NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
- Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot
Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.