Battery Calculatorby Voltage Drop Calculator

Battery calculators / Energy & conversions

Understand your battery. Plan your power.

Watt Hours to Watts Calculator

Calculate watt hours to watts with all required electrical inputs.

Your inputs

Wh
h

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Average W = Wh ÷ hours

Energy alone cannot specify maximum power; this is average power over an entered duration.

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

Watt hour to watts conversion is an average-power calculation

A watt hour to watts calculator divides energy by duration. It answers how much average power an energy amount can support over the selected interval. It cannot determine the maximum output of a battery, inverter or portable power station.

For a watt hour runtime calculation, reverse the relationship: duration = delivered Wh / load W. The operating energy must be measured at the same boundary as the load. Using nominal battery energy with AC watts without conversion losses will overestimate runtime.

Worked example

A transparent starting point

1,200 Wh delivered over 8 hours = 150 W average.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Delivered energy (Wh)Average delivered power
600 Wh75 W
1,200 Wh150 W
1,800 Wh225 W

All other inputs use the illustrative defaults in the form.

Watt hour to watts conversion is an average-power calculation — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
100Wh over 1hDelivered energy: 100 Wh; Operating duration: 1 h100 W
100Wh over 8hDelivered energy: 100 Wh; Operating duration: 8 h12.5 W
500Wh over 1hDelivered energy: 500 Wh; Operating duration: 1 h500 W
500Wh over 8hDelivered energy: 500 Wh; Operating duration: 8 h62.5 W
1200Wh over 1hDelivered energy: 1,200 Wh; Operating duration: 1 h1,200 W
1200Wh over 8hDelivered energy: 1,200 Wh; Operating duration: 8 h150 W
10000Wh over 1hDelivered energy: 10,000 Wh; Operating duration: 1 h10,000 W
10000Wh over 8hDelivered energy: 10,000 Wh; Operating duration: 8 h1,250 W

Unchanged inputs: Delivered energy = 1,200 Wh; Operating duration = 8 h. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Why do I need the extra input?

Energy alone cannot specify maximum power; this is average power over an entered duration.

How should I use the result?

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

How many watts is 100 Wh?

Over one hour, 100 Wh corresponds to 100 W average. Over two hours it corresponds to 50 W. Wh alone does not define watts.

How do I convert Wh to hours?

Divide delivered energy in Wh by the continuous or time-averaged load in watts. Include battery reserve and conversion losses when starting with nominal battery Wh.

Are watt hours to volt amps a direct conversion?

No. VA is apparent power and Wh is real energy. Duration and, for AC loads, power factor are needed to relate them.

Why does a 1kWh battery not necessarily run a 1kW load?

Its BMS or inverter may not support that power, and available output energy can be below the nominal rating. Both power capability and energy must be checked.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
  2. NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
  3. Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.