Battery Calculatorby Voltage Drop Calculator

Battery calculators / Energy & conversions

Understand your battery. Plan your power.

mAh to Wh Calculator

Calculate mah to wh with all required electrical inputs.

Your inputs

mAh
V

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Wh = mAh × V ÷ 1,000

Use the internal cell voltage for a power bank rated at the cell level, rather than the USB output voltage.

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

Power-bank mAh to Wh conversion at the correct voltage

To convert mAh to Wh, divide the milliamp-hours by 1,000 and multiply by nominal volts. A 10,000 mAh rating at 3.7 V is 37 Wh; using 5 V for the same internal-cell rating would incorrectly imply 50 Wh. Check which electrical boundary the label describes.

This calculator also supports calculations such as 10000 mAh to Wh, 20000 mAh to Wh, and 5000 mAh to Wh by changing the capacity field. For mAh to kWh, divide the Wh result by another 1,000. Output-side usable capacity additionally requires conversion efficiency.

Worked example

A transparent starting point

10,000 mAh at 3.7 V = 37 Wh.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Rated capacity (mAh)Nominal energy
5,000 mAh18.5 Wh
10,000 mAh37 Wh
15,000 mAh55.5 Wh

All other inputs use the illustrative defaults in the form.

Power-bank mAh to Wh conversion at the correct voltage — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
2000mAh at 3.7VRated capacity: 2,000 mAh; Nominal cell voltage: 3.7 V7.4 Wh
4347mAh at 3.7VRated capacity: 4,347 mAh; Nominal cell voltage: 3.7 V16.0839 Wh
5000mAh at 3.7VRated capacity: 5,000 mAh; Nominal cell voltage: 3.7 V18.5 Wh
10000mAh at 3.7VRated capacity: 10,000 mAh; Nominal cell voltage: 3.7 V37 Wh
20000mAh at 3.7VRated capacity: 20,000 mAh; Nominal cell voltage: 3.7 V74 Wh
50000mAh at 3.7VRated capacity: 50,000 mAh; Nominal cell voltage: 3.7 V185 Wh

Unchanged inputs: Rated capacity = 10,000 mAh; Nominal cell voltage = 3.7 V. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Why do I need the extra input?

Use the internal cell voltage for a power bank rated at the cell level, rather than the USB output voltage.

How should I use the result?

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

How many Wh is 10000 mAh?

At a nominal 3.7 V, 10,000 mAh is 37 Wh. At another voltage the result changes, so mAh alone has no single Wh equivalent.

How do I convert 2000, 5000 or 20000 mAh to Wh?

At 3.7 V these are 7.4, 18.5 and 74 Wh respectively. They are calculated examples at a stated voltage, not assumptions about every battery label.

What is the difference between conversion mAh en Wh and mAh to Wh?

These phrases refer to the same charge-to-energy conversion. The numerical relationship is Wh = mAh × V / 1,000 in any language.

Does the Wh result establish TSA or airline approval?

No. This page calculates energy only. Use the battery label and current official carrier and aviation requirements for a travel decision.

How do I convert 4347 mAh to mWh?

Use mWh = mAh × nominal V. At 3.7 V, 4,347 mAh represents 16,083.9 mWh, or 16.0839 Wh. This page shows Wh; multiply its result by 1,000 for mWh.

Can I use this for convertir mAh a Wh or converter mAh para Wh?

Yes. These searches describe the same charge-to-energy conversion. Enter the labeled capacity and matching nominal battery voltage; the numerical formula is unchanged.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
  2. NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
  3. Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.