Battery calculators / Energy & conversions
Understand your battery. Plan your power.
Battery Voltage from Energy Calculator
Recover a nominal voltage when the same battery label provides both energy and charge capacity.
Your inputs
Your result
Awaiting your inputsEnter your values and press Calculate. Your result will appear here.
The method
Formula and calculation steps
Nominal V = Wh × 1,000 ÷ mAh
Rearrange Wh = nominal V × Ah, converting mAh to Ah first. Both ratings must refer to the same cell or pack configuration.
mAh alone does not determine voltage. This calculation does not determine present terminal voltage, state of charge or the required charging voltage.
Why volts cannot be calculated from mAh alone
A battery voltage calculator based on a label can recover nominal volts when both Wh and charge capacity are stated for the same battery. It rearranges the energy relationship; it does not measure the voltage present at the terminals.
Searches for volts to mAh or amp hours to voltage need an additional energy value. The same mAh can exist at different cell or pack voltages. EMF and terminal voltage under load additionally depend on the battery state and electrical model; this label conversion does not solve those quantities.
Continue with: Battery Watt Hour Calculator · Wh to mAh Calculator · Battery Series and Parallel Pack Calculator
Worked example
A transparent starting point
37 Wh × 1,000 ÷ 10,000 mAh = 3.7 V nominal.
The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.
How one input changes the answer
| Rated energy (Wh) | Inferred nominal voltage |
|---|---|
| 18.5 Wh | 1.85 V |
| 37 Wh | 3.7 V |
| 55.5 Wh | 5.55 V |
All other inputs use the illustrative defaults in the form.
Why volts cannot be calculated from mAh alone — calculated examples
Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.
| Case | Changed inputs | Result |
|---|---|---|
| 37Wh and 10000mAh | Rated energy: 37 Wh; Rated charge capacity: 10,000 mAh | 3.7 V |
| 53Wh and 10000mAh | Rated energy: 53 Wh; Rated charge capacity: 10,000 mAh | 5.3 V |
| 100Wh and 10000mAh | Rated energy: 100 Wh; Rated charge capacity: 10,000 mAh | 10 V |
| 24Wh and 2000mAh | Rated energy: 24 Wh; Rated charge capacity: 2,000 mAh | 12 V |
| 48Wh and 2000mAh | Rated energy: 48 Wh; Rated charge capacity: 2,000 mAh | 24 V |
| 120Wh and 10000mAh | Rated energy: 120 Wh; Rated charge capacity: 10,000 mAh | 12 V |
| 240Wh and 10000mAh | Rated energy: 240 Wh; Rated charge capacity: 10,000 mAh | 24 V |
| 480Wh and 10000mAh | Rated energy: 480 Wh; Rated charge capacity: 10,000 mAh | 48 V |
Unchanged inputs: Rated energy = 37 Wh; Rated charge capacity = 10,000 mAh. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.
Common questions
Can I use USB output mAh with cell-level Wh?
No. Mixing different measurement boundaries gives a misleading voltage. Use matching label ratings.
How should I use the result?
mAh alone does not determine voltage. This calculation does not determine present terminal voltage, state of charge or the required charging voltage.
How do I calculate battery voltage from Wh and mAh?
Divide Wh×1,000 by mAh. Matching 37 Wh and 10,000 mAh ratings imply 3.7 V nominally.
Can I convert volts to mAh?
Only when matching energy is known: mAh = Wh×1,000/V. Voltage by itself cannot establish battery charge capacity.
How is terminal voltage of a battery calculated?
A simple source model uses EMF minus current times internal resistance under discharge, but actual terminal voltage depends on conditions. This tool only recovers nominal voltage from label energy and capacity.
Does the result give a safe charging voltage?
No. Nominal voltage is not a charger setpoint. Obtain the correct chemistry, series count and charging profile from the manufacturer.
Related calculators
Sources and formula basis
Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.
- FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
- NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
- Victron Wiring Unlimited §2 — electrical theory, cable resistance and voltage drophttps://www.victronenergy.com/media/pg/The_Wiring_Unlimited_book/en/theory.html
- Cadex Battery University BU-902 — internal resistance measurementhttps://www.batteryuniversity.com/article/bu-902-how-to-measure-internal-resistance
Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.