Battery Calculatorby Voltage Drop Calculator

Battery calculators / Energy & conversions

Understand your battery. Plan your power.

Amp Hours to Amps Calculator

Calculate amp hours to amps with all required electrical inputs.

Your inputs

Ah
h

Defaults are illustrative. Enter your battery or equipment data. Efficiency and usable capacity inputs are percentages.

Your result

Awaiting your inputs

Enter your values and press Calculate. Your result will appear here.

Explained formula · Sources listed below · No sign-up

The method

Formula and calculation steps

Average A = Ah ÷ hours

Duration is required; Ah is charge capacity and A is current.

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

Amp hour to amp conversion needs a time interval

Amp hours to amps is a capacity-to-average-current calculation, not a direct unit substitution. The time interval matters: 100 Ah over 20 hours is 5 A, while 100 Ah over 10 hours is 10 A in an ideal model. Actual usable capacity may depend on the discharge rate.

An amp hour to amp calculator does not reveal a battery continuous current limit or CCA rating. A manufacturer can specify both an Ah rating and a much different current capability. Use the C-rate tool to normalize a chosen current relative to capacity.

Worked example

A transparent starting point

100 Ah over 20 hours = 5 A average.

The values below are computed with the same formula as the calculator. They are examples, not manufacturer performance claims.

How one input changes the answer

Rated battery capacity (Ah)Average discharge current
50 Ah2.5 A
100 Ah5 A
150 Ah7.5 A

All other inputs use the illustrative defaults in the form.

Amp hour to amp conversion needs a time interval — calculated examples

Each row below is calculated from the stated case inputs. Inputs not changed in a row use the assumptions listed after the table.

CaseChanged inputsResult
7Ah over 10hRated battery capacity: 7 Ah; Discharge duration: 10 h0.7 A
7Ah over 20hRated battery capacity: 7 Ah; Discharge duration: 20 h0.35 A
50Ah over 10hRated battery capacity: 50 Ah; Discharge duration: 10 h5 A
50Ah over 20hRated battery capacity: 50 Ah; Discharge duration: 20 h2.5 A
100Ah over 10hRated battery capacity: 100 Ah; Discharge duration: 10 h10 A
100Ah over 20hRated battery capacity: 100 Ah; Discharge duration: 20 h5 A
200Ah over 10hRated battery capacity: 200 Ah; Discharge duration: 10 h20 A
200Ah over 20hRated battery capacity: 200 Ah; Discharge duration: 20 h10 A

Unchanged inputs: Rated battery capacity = 100 Ah; Discharge duration = 20 h. Rows change only the listed inputs. Values are arithmetic examples, not manufacturer performance claims.

Common questions

Why do I need the extra input?

Duration is required; Ah is charge capacity and A is current.

How should I use the result?

This is an algebraic energy or charge calculation. It does not establish a battery discharge rating or charger compatibility.

How do I calculate amps from amp hours?

Divide Ah by hours for average current. This assumes the stated charge is delivered within that time.

Can I convert mAh to amps?

Convert mAh to Ah and divide by duration in hours. For example, 2,000 mAh over two hours is 1 A average.

Does 100Ah mean a battery supplies 100 amps?

No. It describes charge capacity under rated test conditions. The operating duration and allowed current are separate requirements.

Is average current the same as peak current?

No. Motors and transmitters can draw brief peaks much greater than the time average. Check pulse capability independently.

Sources and formula basis

Source addresses are shown as plain text. Algebraic rearrangements, example tables and user-selected loss factors are calculated on this site. A reference does not endorse every illustrative input.

  1. FAA — watt-hour rating: nominal volts × amp-hourshttps://www.faa.gov/hazmat/packsafe/airline-passengers-and-batteries
  2. NIST — SI units and prefixeshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-4-two-classes-si-units-and-si-prefixes
  3. Cadex Battery University BU-503 — power, energy and timehttps://www.batteryuniversity.com/article/bu-503-determining-power-deliver-by-the-ragone-plot

Source pages checked: November 19, 2026. Verify current product data and locally adopted requirements before design or installation.